What if the mobile phone charger is flooded? Can you still use it?

Sometimes there are some minor accidents in life, such as the charger head accidentally falling into the water, or a large amount of water near rivers, lakes and oceans causing water vapor in the charger. What if there is water in the mobile phone charger? If the charger is flooded, can it still be used? In fact, if operated properly, there are many opportunities to save chargers.

When the charging head falls into the water, it should be taken out of the water as soon as possible. Although it has no waterproof function, the shorter the contact time with water, the greater the chance of recovery. Secondly, remove the shell and dry it with a cloth with strong water absorption. If the soaking time is not long, it can be naturally dried in a cool place, otherwise it needs to be dried with a hair dryer.

If the humidity is high, it can be treated by a relatively simple method. For example, rice can absorb the excess water vapor of the mobile phone charger itself, or it can be dried in a natural shade. Do not choose the dangerous method of evaporating water vapor by exposure to the sun or microwave oven.

When the mobile phone charger is flooded, it should also pay attention to the following aspects:

1. Do not charge. When the charging head is submerged, everyone will be confused about whether it can still be used. When the water is not completely discharged, charging the mobile phone will lead to short circuit of the internal components of the charging head and burn out other components.

2. Don't disassemble it casually. Soaking in water for a long time will inevitably lead to sufficient water vapor in the charging head. At this point, it is really necessary to remove moisture, but once the shell is opened, the parts will be exposed. At this time, be careful not to touch anything on the circuit board to avoid damage. It would be better to invite experienced people to operate.

3. Please use cold air for dehumidification. Compared with hot air, the water removal efficiency of cold air is poor. However, due to local high temperature, it is easy to melt and deform circuit board parts, which makes the charger unusable in the future. Therefore, it is wiser to choose cold air for drying. Wipe off the moisture gently with a dry paper towel, and then blow dry with cold air or electric fan.

4. It also learned to put it in a rice can. When placing rice cans, rice grains can easily enter the USB socket. You can gently insert rice grains into the socket with a paper towel, which will not only prevent rice grains from entering, but also facilitate taking them out later. Of course, it can also absorb some water.

If you feel that you can't operate, you can ask an experienced person for help. You can also dry the water to avoid electrification, then put the charger in a sealed bag and take it directly to the maintenance station, where someone will handle it.

What if the mobile phone charger is flooded? Everyone needs to know the specific operation steps! As long as it is handled correctly, the charger can continue to be used! If you really want to buy a new one in the future, you should pay attention to the regular brand, 3C certification and reputable products when choosing. If you have any questions about this, please leave a message to Xiaobian at any time ~